|
Last Modified: 11-29-2007 |
1.6 A |
|
Service Category: Vehicle Interior |
Section: Seat |
|
Model Year: 2008 |
Model: Sequoia |
Doc ID: RM0000030LB002X |
|
Title: SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat): INSTALLATION (2008 Sequoia) |
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
-
Use the same procedure for the LH side and RH side.
-
The procedure listed below is for the LH side.
1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Climate Control Seat System)
|
(a) Engage the 3 claws to install the bush.
|
|
(b) Install the lumbar support adjuster assembly with the 2 screws.
|
(c) Connect the connector.
|
(d) Engage the 4 hooks to install the seatback spring.
|
(e) Install the 4 springs.
|
(f) Engage the 2 clamps and connect the connector.
|
2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/o Climate Control Seat System)
|
(a) Attach the 3 claws to install the bush.
|
|
(b) Install the lumbar support adjuster with the 2 screws.
|
(c) Connect the lumbar support adjuster connector.
|
(d) Engage the 6 hooks to install the seatback spring.
|
3. INSTALL SEATBACK COVER WITH PAD
4. INSTALL FRONT SEAT HEADREST SUPPORT
5. INSTALL FRONT SEAT CUSHION SHIELD INNER LH
6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
7. INSTALL FRONT SEAT CUSHION SHIELD LH
8. INSTALL RECLINING POWER SEAT SWITCH KNOB
9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH
10. INSTALL FRONT SEAT ASSEMBLY LH
(a) Install the front seat assembly
.
|